Jeep Wrangler JK/JL Rear 1350/1410 Series XTreme/Severe Duty Duty 1 Piece Driveshaft (Must Provide Measurement)

Made to Order

Application:

This Extreme Duty Series 1 Piece Solid U-joint 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Jeep. This Driveshaft will work up to a 4 1/2" Lift, after that the angle may be too Severe and could cause a slight vibration on or off the Throttle.

Please enter Your Measurement, Year, Make, Model, and Lift Size in the notes when you check out, or you can e-mail us at BullyDriveline@Gmail.com after you have purchased the Item. There is a Measurement Chart above showing you how we would like you to measure with the jeep sitting at Ride Height.

PLEASE NOTE: THIS 1 PIECE DRIVESHAFT WILL NOT WORK ON ANY LONG ARM SUSPENSIONS OR ANY HIGH PINION REAR DIFFERENTIALS. IF YOU HAVE A HIGH PINION, YOU WILL NEED TO GO WITH OUR 2 PIECE DESIGN.

Benefits for Buying an Bully Driveshaft over Others: 

• Rear Driveshaft Part# DS-Jeep-Gladiator-Rear-1350CV
• Made out of 3 1/2" X .083 Wall D.O.M. tubing.
• Has Long 1 1/2" Full Spline Slip n Stub.
• Built only with Components made by Spicer, Neapco.
  
• Has the Strongest Solid Non Greasable U-joints on the Market. You Break the U-joint by Torque we replace it.
• Comes with a Forged Rear U-bolt Style Dana 44 Pinion Yoke that supports the U-joint Cap Half way around unlike our Competitors.
  
• Comes with a Solid Steel Rear transfer case Saginaw Flange yoke with Grade 10 CV Bolts.

This Item will include the following parts as Pictured up Top:

[1] 3 1/2" X .083 Wall Extreme Duty 1350 CV Driveshaft with Solid Non Greasable U-joints. Lifetime Warranty if you twist our tube, break a weld, or break a U-joint in half due to Torque.

[1] American Made Rear 1350 Saginaw Transfer Case Output Shaft Flange Yoke.

[1] American Made Rear 1350 Forged Pinion Yoke.

[1] Set of 1350 U-bolts.

[4] Grade 10 CV bolts.

[1] Bully T-shirt

Driveshafts come painted Gloss Black Show Quality.